X-ThE-ShAnA
08-27-2008, 07:39 PM
Wireless Labs Sms Forwarder v2.21 S60v3 CrAcked-SergeyL
http://i168.photobucket.com/albums/u179/cuocphieuluu1/thinh1/screenshot0071_648.jpg
Introduction
Nowadays we often have 2 or more mobile numbers. We know most mobile communication operators can supply call forward service so we can forward call from one number to another. But few operators supply short message forwarding service. Now we can make it with SMS Forwarder.
SMS Forwarder can forward incoming short messages to another cellular number automatically. Once there is new short message coming, the software will read its content and then send a new message with the content to another cellular number.
Features
Forward incoming short messages to another cellular number automatically.
Only SMS is forwarded. MMS or EMS is not forwarded.
The cellular number which forward to is configurable at any time.
User can select to forward all messages or forward messages from a specific number only.
Support to start automatically upon phone boot.(*)
The message forwarding service can be open/close manually at any time.
Encoding of SMS (GSM 7bit/8bit/UCS2) is configurable to match your operator.
Message sent by the software is configurable to keep in Sentbox or not.
Information about the original sender is added to the forwarded message content.
Support to remove delivery report of forwarded messages.
Record of forwarded message can be removed from call log.
Prevent forwarding message which is from/to configured number.
(*)For S60 3rd edition phones, SMS Forwarder needs to work with PowerBoot to enable this feature. Please follow operations below:
1) Open SMS Forwarder and activate the softwrae.
2) Open PowerBoot and go to "Running Apps".
3) Add "SmsFwDaemon_0xA0002021.exe" to startup list.
Quick Guide
The "Activate" item displays the SMS forwarding service status. You can switch on/off the service as you like.
After you turn on the service, the SMS forwarding service will always work even you have exit the application. If you hope to stop the service, you must turn off it manually with the application.:cool1:
http://i168.photobucket.com/albums/u179/cuocphieuluu1/thinh1/screenshot0071_648.jpg
Introduction
Nowadays we often have 2 or more mobile numbers. We know most mobile communication operators can supply call forward service so we can forward call from one number to another. But few operators supply short message forwarding service. Now we can make it with SMS Forwarder.
SMS Forwarder can forward incoming short messages to another cellular number automatically. Once there is new short message coming, the software will read its content and then send a new message with the content to another cellular number.
Features
Forward incoming short messages to another cellular number automatically.
Only SMS is forwarded. MMS or EMS is not forwarded.
The cellular number which forward to is configurable at any time.
User can select to forward all messages or forward messages from a specific number only.
Support to start automatically upon phone boot.(*)
The message forwarding service can be open/close manually at any time.
Encoding of SMS (GSM 7bit/8bit/UCS2) is configurable to match your operator.
Message sent by the software is configurable to keep in Sentbox or not.
Information about the original sender is added to the forwarded message content.
Support to remove delivery report of forwarded messages.
Record of forwarded message can be removed from call log.
Prevent forwarding message which is from/to configured number.
(*)For S60 3rd edition phones, SMS Forwarder needs to work with PowerBoot to enable this feature. Please follow operations below:
1) Open SMS Forwarder and activate the softwrae.
2) Open PowerBoot and go to "Running Apps".
3) Add "SmsFwDaemon_0xA0002021.exe" to startup list.
Quick Guide
The "Activate" item displays the SMS forwarding service status. You can switch on/off the service as you like.
After you turn on the service, the SMS forwarding service will always work even you have exit the application. If you hope to stop the service, you must turn off it manually with the application.:cool1: